TRENDnet Switch TEGS50G User Manual

Quick Installation Guide  
TEG-S50g  
TEG-S80g  
H/W: V1  
 
1. Before You Start  
Package Contents  
?TEG-S50g/TEG-S80g  
?Quick Installation Guide  
?AC Power Adapter (7.5V DC, 1A)  
Installation Requirements  
?A computer with a network adapter installed  
?Cat-5e or Cat-6 Network Cable  
?The surface must support at least 1.5 Kg for the Switch  
?The power outlet should be within 1.82 meters (6 feet) of the Switch  
?Visually inspect the DC power jack to make sure that it is securely  
connected to the power adapter  
?Make sure that there is proper heat dissipation from and adequate  
ventilation around the Switch  
?Do not place heavy objects on the Switch  
1
 
English  
Application  
TEG-S50g  
1
Delivers less power  
to unused ports  
on  
on  
less power  
2
Delivers less power  
when devices are off  
on  
on  
off  
less power  
3
Delivers less power  
20m  
60m  
100m  
GREENnet  
Switch  
with shorter  
cable lengths  
Full Power  
20m  
60m  
100m  
Regular  
Switch  
*Max power savings compared with standard TRENDnet switches.  
TEG-S80g  
1
Delivers less power  
to unused ports  
on  
on  
less power  
2
Delivers less power  
when devices are off  
on  
on  
off  
less power  
3
Delivers less power  
with shorter  
cable lengths  
20m  
20m  
60m  
100m  
GREENnet  
Switch  
Full Power  
60m  
100m  
Regular  
Switch  
*Max power savings compared with standard TRENDnet switches.  
2
 
English  
2. Hardware Installation  
1. Connect the AC Power Adapter to  
the TEG-S50g/TEG-S80g and then  
to a power outlet.  
2. Connect a CAT-5e or CAT-6 RJ-45  
network cable from the computer to  
an available Ethernet port of the  
TEG-S50g/TEG-S80g.  
3
 
English  
3. LEDs  
TEG-S50g  
Power  
Green: Poweris on.  
NotIlluminated: Poweris off.  
Link/ACT  
Green(Solid): Link to another  
device.  
Green(Blinking): Activity is  
occurring from the link  
Not Illuminated: Nothing is  
detected on the port.  
1000Mbps  
Green: Connection for the port is  
1000 (Full)  
100Mbps  
Green: Connection for the port is  
100 (Full)  
Not Illuminated: Connection for  
the port is 10 or 100 or nothing  
is detected on the port.  
Not Illuminated: Connection for  
the port is 10(Full/Half) or  
1000(Full/Half) or nothing is  
detected on the port.  
4
 
English  
TEG-S850g  
Power  
Green: Poweris on.  
NotIlluminated: Poweris off.  
Link/ACT  
Green(Solid): Link to another  
device.  
Green(Blinking): Activity is  
occurring from the link  
Not Illuminated: Nothing is  
detected on the port.  
100/1000Mbps  
Green: Connection for the port is  
1000 (Full)  
Amber: Connection for the port  
is 100 (Full/Half)  
Not Illuminated: Connection for  
the port is 10(Full/Half) or  
nothing is detected on the port.  
5
 
English  
Technical Specifications  
Hardware  
Standards  
IEEE 802.3 10BASE-T  
IEEE 802.3u 100BASE-TX  
IEEE 802.3ab 1000BASE-T  
IEEE 802.3x Flow Control  
Network Media  
Ethernet: 2-Pair UTP/STP CAT-3, -4, -5  
Fast Ethernet: 2-Pair UTP/STP CAT-5, -5e , -6  
Gigabit : 4-Pair UTP/STP CAT-5e, CAT-6  
(Recommended)  
Data Transfer Rate  
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)  
Fast Ethernet: 100Mbps (half-duplex), 200Mbps  
(full-duplex)  
Gigabit Ethernet: 2000Mbps (full-duplex)  
Protocol/Topology  
Interface  
CSMA/CD / Star  
TEG-S50g: 5 x 10/100/1000 Auto-MDIX RJ-45 ports  
TEG-S80g: 8 x 10/100/1000 Auto-MDIX RJ-45 ports  
Data RAM Buffer  
TEG-S50g: 104KBytes per device  
TEG-S80g: 128Kbytes per device  
Jumbo Frame Support  
TEG-S50g: Up to 12Kbytes  
TEG-S80g: Up to 9612Bytes  
Packet Filtering/  
Forwarding Rate  
10Mbps Ethernet: 14,880pps (packet per second)  
100Mbps Fast Ethernet: 148,800pps  
1000Mbps Gigabit Ethernet: 1,488,000pps  
MAC Address Learning  
Filtering Table  
Automatic Update  
TEG-S50g: 4K entries per device  
TEG-S80g: 4K entries per device  
Switch Fabric  
TEG-S50g: 10Gbps Forwarding Capacity  
TEG-S80g: 16Gbps Forwarding Capacity  
Power Consumption  
TEG-S50g: 3.67W (max)  
TEG-S80g: 5W (max)  
6
 
Hardware  
TEG-S50g: Power, Link/ACT, 100Mbps, 1000Mbps  
TEG-S80g: Power, Link/ACT, 100/1000Mbps  
Diagnostic LEDs  
Power Adapter  
7.5V DC, 1A External Power Adapter  
171 x 98 x 28 mm (6.7 x 3.86 x 1.1 in.)  
Dimensions  
Weight  
TEG-S50g: 430g  
TEG-S80g” 450g  
Temperature  
Humidity  
Operating: 0° ~ 40° C (32° ~ 104° F)  
Storage: -10° ~ 70° C (14° ~ 158° F)  
Operating: 10% ~ 90%  
Storage: 5% ~ 90%  
Certification  
CE, FCC  
7
 
Troubleshooting  
Q1: After connecting the Switch to a power outlet, the LEDs do not turn on.  
A1: Check the connection of the external power adapter to the TEG-S50g/  
TEG-S80g and the power outlet. Also check that the power outlet is receiving  
power.  
Q2: When I connect a computer to one of the ports on the Switch, the Power and  
the Link/ACT LED is lit, but I am not getting Gigabit speeds.  
A2: First, check the LEDs. If you have the TEG-S50g, if the 1000Mbps LED is off,  
the computer's connection speed is 10Mbps or 100Mbps. If you have the  
TEG-S80g, if the 100/1000Mbps LED is amber, the computer's connection speed  
is 100Mbps. If the 100/1000Mbps LED is off, the computer's connection speed is  
10Mbps. Second, check the Ethernet Cable. Make sure you are using CAT-5e or  
CAT-6 Ethernet Cables. Some CAT-5 cables are not rated to run in Gigabit. Third,  
make sure that you have a Gigabit Ethernet adapter installed on your computer.  
Q3: After I connect my PCs to the Switch, I am unable to share files.  
A3: First, check the LEDs on the Switch. Make sure the Link/ACT LED is on.  
Second, check the network cable. The minimum length of the cable is 1.5 meters  
and the maximum length of the cable is 100 meters. Third, disable any software  
firewall program. Fourth, verify that you have file sharing enabled. Please contact  
your Operating System support for more information.  
Q4: After I connect my PCs to the Switch, I can only get onto the Internet from one  
computer.  
A4: The Switch was not designed to share Internet between multiple computers.  
You need to get an Internet router such as the TW100-S4W1CA.  
Q5: Where is the uplink port located on the Switch?  
A5: Since all the ports on the Switch are Auto-MDIX, any of the ports can be used  
as an uplink port.  
If you still encounter problems or have any questions regarding the TEG-S50g/  
TEG-S80g please contact Trendnet's Technical Support Department.  
8
 
Limited Warranty  
TRENDnet warrants its products against defects in material and workmanship, under  
normal use and service, for the following lengths of time from the date of purchase.  
TEG-S50g/TEG-S80g - 5-Year Limited Warranty  
If a product does not operate as warranted above during the applicable warranty period,  
TRENDnet shall, at its option and expense, repair the defective product or deliver to  
customer an equivalent product to replace the defective item. All products that are  
replaced will become the property of TRENDnet. Replacement products may be new or  
reconditioned.  
TRENDnet shall not be responsible for any software, firmware, information, or memory  
data of customer contained in, stored on, or integrated with any products returned to  
TRENDnet pursuant to any warranty.  
There are no user serviceable parts inside the product. Do not remove or attempt to  
service the product through any unauthorized service center. This warranty is voided if  
(i) the product has been modified or repaired by any unauthorized service center, (ii) the  
product was subject to accident, abuse, or improper use (iii) the product was subject to  
conditions more severe than those specified in the manual.  
Warranty service may be obtained by contacting TRENDnet office within the applicable  
warranty period for a Return Material Authorization (RMA) number, accompanied by a  
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-  
authorized by TRENDnet with RMA number marked on the outside of the package, and  
sent prepaid, insured and packaged appropriately for safe shipment.  
9
 
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE  
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT  
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING  
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF  
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET  
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT  
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,  
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.  
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND  
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES  
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S  
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED  
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE  
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER  
HAZARD.  
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET  
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER  
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,  
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,  
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF  
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN  
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,  
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH  
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND  
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF  
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED  
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.  
Governing Law: This Limited Warranty shall be governed by the laws of the state of  
California.  
Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry a 1-Year  
Warranty  
10  
 
Certifications  
This equipment has been tested and found to comply with FCC and CE Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received. Including interference that may  
cause undesired operation.  
Waste electrical and electronic products must not  
be disposed of with household waste. Please  
recycle where facilities exist. Check with you Local  
Authority or Retailer for recycling advice.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV  
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO  
OPERATE THE EQUIPMENT.  
ADVERTENCIA  
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón  
necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir  
daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y  
frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.  
 
Product Warranty Registration  
Please take a moment to register your product online.  
20675 Manhattan Place  
Torrance, CA 90501  
USA  
 
Copyright ©2008. All Rights Reserved. TRENDnet.  

Telex Stereo Amplifier 810 100 User Manual
Tiger Games 9 009 03 User Manual
Toastmaster Waffle Iron TWB2PIZ User Manual
Toshiba CRT Television 27DF46 User Manual
Transition Networks Network Card CSRFB10XX 100 User Manual
Ultimate Products Car Speaker T1 420 User Manual
Uniden Cordless Telephone DXAI8580 Series User Manual
Uniden Scanner BCT8 User Manual
ViewSonic Camera Lens VFM1530 11 User Manual
Weber Gas Grill 55263 User Manual